Instant PVC Card:
  Printing method: Inkjet printer (Epson R210 or R230 is recommended)
  Laminating type: pouch laminating
  Color: White, Golden or Silver
  Thickness: 1. Two printable PVC sheet, each one is 0.15mm
                       Core sheet 0.46mm
                   2. Two printable PVC sheet each one is 0.28mm
                       Core sheet 0.20mm
  Size: 200x300mm or as per your requirement, or in roll type

1.Small production

Steps:
  1. Design in computer, you may use Coreldraw, Photoshop, Illustrator, Freehand, etc. software to make

  design in your computer
  2. Put the blank printable overlay/film into the inkjet printer (Epson R210 is recommended), reverse-print

  (Note: when you put the printable overlay/film into the inkjet printer, please put right side for print, DON’T

  PUT WRONG SIDE!) You may print two films, one as front side of the card, one as backside.
  3. After printing, let the printed film dry around 5-10 minutes, then, remove the protection film from the

  both sides of the core PVC sheet, put one printed film on one side of the PVC sheet and put the other

  printed film onto the other side of the PVC sheet, then, put them all into the pouch laminator for

  lamination. You may set the temperature at 130-140C, to get a better laminating result, you may laminate

  twice.
  4. After laminating, use a cutter to cut the laminated sheet into two half sheets (two pieces of sheet with

  size of 100x300mm)
  5. Put the sheet into manual puncher for punching
  6. After punching, you will get a final cards.