1.Process
explanation:
Steps:
1. Design in computer, you
may use Coreldraw, Photoshop, Illustrator, Freehand, etc. software to make
design in your computer
2. Put the blank printable film into the printer (Epson R210 or C1100 is
recommended), reverse-print
(Note: when you put the printable
film into the inkjet printer, please put right side for print, DON’T
PUT
WRONG SIDE!) You may print both
front and backside at one printable film.
3. After printing,
let the printed film dry around 5-10 minutes, then, remove the protection
film from the
front side of the adhesive sheet,
put the printed film onto the adhesive sheet (with printed side facing
the
adhesive sheet, put them together
into the pouch laminator for lamination. You may set the
temperature
at 130-140C for inkjet-print or
160C for laser-print, to get a better laminating result, you may
laminate
twice.
4. After
laminating, use a cutter to cut the laminated sheet into two half sheets
(two pieces of sheet with
size of 100x300mm)
5.
Put the sheet into manual puncher for punching to cut into standard card
shape, remove the protection
paper from backside, then, stick
it onto a blank card
6. After sticking, you will get a final
cards. |
